Cooling Tower Water Distribution System, Cooling Tower Fan and Pump Motor Service

Water Pump Centrifugal

The standard for efficient, reliable water movement.
A centrifugal water pump is the most common type of pump used globally to move water by converting rotational energy from an impeller into hydrodynamic flow and pressure.

VFD Compatible Centrifugal Water Pumps

Engineered for intelligent speed control and maximum energy efficiency.
VFD compatible centrifugal water pumps are specifically designed or selected to operate reliably and efficiently across a variable speed range when controlled by a Variable Frequency Drive.

Vertical In-line Centrifugal Pumps for AHU

Space-saving, efficient circulation for air handling unit water circuits.
Vertical in-line centrifugal pumps are installed directly into the piping run, requiring no baseplate and minimal floor space—making them ideal for tight mechanical rooms serving Air Handling Units (AHUs).

Variable Frequency Drive (VFD) Pump Optimization

Maximizing energy savings and system performance from your VFD pump system.
VFD pump optimization goes beyond simple installation—it involves fine-tuning the drive, controls, and system parameters to achieve the highest possible efficiency, reliability, and process control.

Single Stage Centrifugal Pump

Simple, efficient, and versatile fluid movement with one impeller.
A single stage centrifugal pump uses a single impeller to increase the pressure and velocity of a fluid, making it the most common, cost-effective, and maintenance-friendly pump design for a vast range of applications.

Self-priming Centrifugal Pumps for Industrial Waste

Reliable start-up and handling of difficult, aerated, or intermittent waste streams.
Self-priming centrifugal pumps are designed to automatically evacuate air from the suction line and pump casing, allowing them to start and re-prime without manual intervention—even when the pump is installed above the fluid level.

Net Positive Suction Head (NPSH) Calculation for Pumps

Critical analysis to prevent cavitation and pump damage.
Net Positive Suction Head (NPSH) calculation determines if a pump has enough pressure at its suction to avoid cavitation—the formation and collapse of vapor bubbles that destroy impellers and dramatically reduce pump life.

MEP Pump Commissioning for Commercial Buildings

Certified handover ensuring all building water systems perform as designed.
MEP pump commissioning is the rigorous, final validation process for all pumping systems in a commercial building—including HVAC, plumbing, and fire protection—before tenant occupancy.

Mechanical Water Pump

General term for engine or mechanically-driven water movement.
A "mechanical water pump" broadly refers to any pump that uses mechanical force—typically from an engine, motor, or manual operation—to move water, as opposed to pneumatic or hydraulic pumps.

Industrial Centrifugal Pumps

Heavy-duty fluid handling for demanding process applications.
Industrial centrifugal pumps are engineered for continuous, severe-duty operation in sectors such as oil & gas, chemical processing, mining, power generation, and water treatment.

How Centrifugal Pumps Work

Converting rotational energy into fluid flow and pressure.
A centrifugal pump is a dynamic machine that uses a rotating impeller to increase the velocity and pressure of a fluid. It is the most common pump type due to its simplicity, efficiency, and ability to handle large volumes.

Horizontal Split Case Centrifugal Pumps

High-flow, high-reliability pumping with easy maintenance access.
Horizontal split case (HSC) centrifugal pumps feature a casing that splits horizontally along the shaft centerline, providing direct access to the impeller and bearings without disconnecting the suction or discharge piping.

Horizontal Centrifugal Pump

The industry standard for versatile, accessible, and reliable fluid handling.
Horizontal centrifugal pumps, with their shaft mounted parallel to the ground, are the most common pump configuration due to their ease of installation, maintenance, and wide availability.

High-flow Water Pump

Massive volume transfer for large-scale water movement.
High-flow water pumps are engineered to move vast quantities of water—often thousands of cubic meters per hour—for applications like raw water intake, flood control, large-scale irrigation, power plant cooling, and district system circulation.

Energy-efficient Centrifugal Pump Retrofitting

Transform existing pumps into high-efficiency assets with rapid ROI.
Energy-efficient centrifugal pump retrofitting involves upgrading or modifying an existing pump system to significantly reduce its energy consumption.

End Suction Centrifugal Pump for Chillers

Reliable, efficient circulation for chiller evaporator and condenser loops.
End suction centrifugal pumps are the most common and cost-effective choice for circulating water through chiller systems. Their robust, single-stage design offers dependable performance for both chilled water and condenser water service.

Electric Centrifugal Pump

Efficient, motor-driven fluid movement for diverse applications.
Electric centrifugal pumps use an AC or DC electric motor to drive an impeller, creating centrifugal force to move water and other low-viscosity fluids.

Double Suction Centrifugal Pumps for District Cooling

High-capacity, high-reliability circulation for large-scale thermal networks.
Double suction centrifugal pumps are the preferred choice for district cooling primary circulation due to their ability to handle extremely high flow rates with balanced axial thrust, ensuring long bearing life and stable 24/7 operation.

Corrosion-resistant Stainless Steel Centrifugal Pumps

Durable, reliable performance for aggressive fluids and harsh environments.

Centrifugal Water Pump for HVAC

The efficient heart of heating and cooling water circulation.
Centrifugal water pumps are the standard for moving chilled water, condenser water, and heating hot water through HVAC systems in commercial and industrial buildings.

Centrifugal Pump

Efficient, reliable fluid movement through rotational kinetic energy.
Centrifugal pumps are the most common type of pump used globally, converting rotational energy from an impeller into hydrodynamic energy to move fluids.

Centrifugal Pump Vibration Analysis Services

Predictive diagnostics to prevent failures and extend pump life.
Vibration analysis is a non-intrusive, predictive maintenance technique that detects developing mechanical faults in centrifugal pumps long before they cause catastrophic failure.

Centrifugal Pump Supplier

Your trusted single-source for centrifugal pumping solutions across Malaysia.
As a leading centrifugal pump supplier, EKG (Malaysia) Sdn Bhd provides a comprehensive range of pumps for HVAC, building services, industrial processes, water management, and infrastructure.

Centrifugal Pump Repair

Expert restoration to full performance, minimizing downtime and cost.
Centrifugal pump repair by EKG Malaysia involves a systematic process to diagnose failures, restore hydraulic efficiency, and correct root causes—extending pump life and protecting your operations from unexpected stoppages.